K & S Miniature Bending Springs (Set of 5 )

Suitable for Brass,Copper & Ali tube

Sizes 1/16" to 3/16" OD   

K & S Tube cutter.

Cuts 1/16"----5/8"  Dia

6 pc  double ended BA Spanner set

Sizes 0BA ----11BA

Set 10 Needle files

1 x half-round with tapered end, 1 x round, 1 x crossing, 1 x barrette, 1 x three square, 1 x square with tapered end, 1 x flat warding file, 2 x tapered flat files, 1 x round edge pillar with tapered end.

Digital Vernier Calliper (uses SR44 battery)

Hardened stainless steel with 13 x 38mm display screen

Supplied in strong plastic storage case

Measuring range 0-150mm AND 0-6" with 0.01mm (0.0005") graduations

Accuracy +/- 0.03mm (0.001")

Switch from metric to imperial  (& vice -versa) at the touch of a button

4-function measurement: internal, external, depth and step. Thumb lock adjustment and zero setting at any position.

Ideal for holding small items whilst soldering or painting.

Lens dia 60mm    Magnification 2.5 x

60mm Dial indicator.Rotating bezel with lock.

Range 0-10mm,graduations 0.01mm.

Quick, simple method of determining the centre of round or square stock up to 200mm (8") dia and hexagonal stock up to 146mm (5 3/4") dia.

Stainless steel gauge for 118° twist drills up to 50mm dia.

Ground stainless steel square locates centre of round material.

Bevelled blade for accuracy.

Used to determine internal and external thread forms.

Blades clearly marked with thread sizes from 0.4-6mm. 20 leaves.

Tempered stainless steel gauge for measuring twist drills

and other small items. Etched graduations

IMPERIAL  temp out of stock

Precision stainless steel rules.

Clear, photo-etched markings with metric and imperial graduations:

0.5mm, 1mm and 1cm metric;

1/2", 1/4", 1/8", 1/16", 1/32" and 1/64" imperial.

Assorted 140 x 3mm diamond needle files with high-grip vinyl handles. Includes flat parallel, flat taper, round, knife, half-round, 3 square and square.

 Supplied in storage wallet

Enamelled frame and satin chrome thimble and sleeve.

Supplied in a strong plastic box.

Range 0-25mm. Resolution 0.01mm.

Use to check run-out or concentricity, establish centres, check straightness or alignment of flat surfaces. Includes chuck holder, needle point, 0.25" dia ball, 0.1" dia disc and offset indicator holder

For use with dial test indicators. Machined base and one vertical side for choice of mounting positions. Fine adjustment screw for quick, accurate height setting. Powerful two side magnet with on/off switch.

Convenient stainless steel pocket rule with drill gauge holes.

Metric and imperial scales.

Stainless steel with brass locking nut. Dual marked from 0-180º in 1º increments for accurate transfer. 150mm arm, 65mm gauge

Stainless steel with etched metric and imperial graduations.

Suitable for angle measurement and transfer.

Maximum depth gauge measurement 150mm.

Hardened stainless steel head with locking nut.

Metric and imperial graduations.

Durable plastic body with pocket clip.

Rotating cutting blade for use on steel, copper, brass and plastic pipes.

Length 240mm

Pencil torch for soldering, jewellery-making and jobs requiring accurate heat application.

Variable gas flow control.

Gas not included.Refill using standard butane lighter gas

Accurately measures concave and convex radii. Stainless steel.

1 x nylon, 1 x brass, 1 x stainless steel.

Suitable for cleaning jobs and removal of flaking paint, rust and dirt. Includes mini brush head.

Overall length 175mm. Brush heads 40mm long x 10mm wide.

Bristle length 15mm. Soft-grip rubber over-moulded handles.

knurled grip and polished tips.

Hardened and tempered.

Used to determine internal and external thread forms.

Blades clearly marked with thread sizes from 0.4-6mm.

 20 leaves

Thread setting gauge for checking the angles when grinding the profile of a cutting tool.

Tempered stainless steel.

Graduations: 14th, 20th, 24th and 32nd of an inch.

 Overall length 60mm. 60 degree UNF/UNC. 55 degree BSF/BSW

Stainless steel gauge marked with 55º, 60°, 90º and 120º angles.

Etched, metric graduations.

High speed steel M42 5% cobalt. Long-lasting and hard wearing.

Will cut any metals including alloys, steels and stainless steels.

Premium quality CS80 carbon spring steel.

For cutting non-ferrous metals, plastics and wood.

Size: 1425 x 6.35 x 0.35mm.

Chrome vanadium with exchangeable jaws for internal and external clips with straight, 45° and 90° tips.

High grade carbon steel.

For marking out and measuring internal and external features.

Accurately ground points and quick split nut adjustment.

For engineers and machinists

Multi-headed inspection/pick-up tool, with telescopic shaft, magnetic pick-up head, standard and magnifying mirror.

Vinyl-dipped handle extends to 800mm.

This hard-wearing plastic holder can be used for  all kinds of tools, mugs, cups and bottles up to 1 Ltr.

Fitted with strong, permanent magnet for secure attachment to any iron or steel surface.

120mm x 90mm dia

Low inertia jewelled bearings and tungsten carbide auto reverse contact point for high sensitivity.

Adjustable bezel for zero setting.

Range 0-0.8mm.Graduation 0.01mm. Scale reads 0-40°

Engineers square with durable hardened steel blade.

Precision ground for maximum accuracy.

Flux-covered electrical solder 60:40 tin/lead.

For electrical and electronic work.